MKII Soft & Hard Addressable Fire Alarm System
Premier Quatro 4 Loop Spare Parts
Model Number | Description |
---|---|
PCB/QT-DISP | Quatro Display PCB (1-4 loops) |
PCB/QT-TERM | Quatro Termination PCB (1-4 loops) |
PCB/PSUEN54/CTRL/5C | Power Supply PCB (5A PSU card - CIE Version) |
SPX-150-30 | Power Supply cage (150W) |
Premier Quatro 8 Loop Spare Parts
Model Number | Description |
---|---|
PCB/QT8-DISP | Quatro Display PCB (4-8 loops) |
PCB/QT8-TERM | Quatro Motherboard (4-8 loops) |
DIN-300-29.5 | Power Supply Module (300W) |
PCB/QT-REP | Quatro Repeater PCB |
Simplicity Plus Spare Parts
Model Number | Description |
---|---|
PCB/SP-64/D | Simplicity Plus 64 Display PCB |
PCB/SP-126/D | Simplicity Plus 126 Display PCB |
PCB/SP-252/D | Simplicity Plus 252 Display PCB |
PCB/SP-252/T | Simplicity Plus Termination PCB |
PCB/PSUEN54/CTRL/2C | Power Supply PCB (2A PSU Card - CIE Version) |
SPX-75-30 | Power Supply Cage (75 W) |
PCB/SP-REP/FF | Simplicity Plus Full Function Repeater PCB |
MKII Addressable Warning Devices
Sandwich Sounder
The Fyreye II Sandwich sounder base is a platform sounder that works with the Zeta Fyreye II protocol. The sounder can be triggered from it`s detectors remote LED output, allowing the sounders to be triggered individually. It can also be triggered using the Protocol`s common sounder group command, meaning that it can be triggered even if it`s detector has been removed.
Model Number | Description | Datasheets & Manuals |
---|---|---|
MKII-SSB | MKII Sandwich Sounder (No Address Required) | |
MKII-SSB/W | MKII Sanwich Sounder - White (No Address Required) | Datasheet |
Xtratone Addressable Wall Sounder
The Xtratone sounders are small, high output addressable devices which are designed to meet EN54 part 3.
The device is a compact unit that fits a standard European back box and can be either surface or semi-flush mounted.
The Xtratone sounder has been designed so that field cables can be terminated in the back box as a first fix.
Model Number | Description | Datasheets & Manuals |
---|---|---|
MKII-AXT/R | Xtratone Addressable Wall Sounder, Red | |
MKII-AXT/W | Xtratone Addressable Wall Sounder, White |
Xtratone Addressable Combined Sounder Beacon
The new Xtratone addressable wall sounder with beacon has been designed to make an “electronics free” first fix and is available in red or white. The beacon has a coverage pattern of W 3.0 - 8.9 and the sounder part has 16 tones selectable at the control panel.
Model Number | Description | Datasheets & Manuals |
---|---|---|
MKII-AXTB/R | Xtratone Addressable Combined Sounder Beacon, Red Body, Clear Flash | |
MKII-AXTB/W | Xtratone Addressable Combined Sounder Beacon, White Body, Clear Flash |
Raptor Addressable Weatherproof Sounder
The Raptor addressable sounder is a large weatherproof horn sounder suitable for many indoor & outdoor applications.
It is available in red or white and has 16 tones selectable at the control panel. Termination of field wiring is made to the backbox for a clean first fix.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZRAP/R | Raptor Addressable Weatherproof Sounder, Red | |
ZRAP/W | Raptor Addressable Weatherproof Sounder, White |
Raptor Addressable Weatherproof Sounder Beacon
The Raptor addressable sounder with beacon has a coverage pattern of W 2.9 - 8.5 and the sounder part has 16 tones selectable at the control panel. It has a flash rates between 0.33Hz and 1.5Hz.
It has been designed to make an “electronics free” first fix and is available in red or white.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZRAPB/R | Raptor Addressable Weatherproof Sounder Beacon, Red Plastic, White Flash | |
ZRAPB/W | Raptor Addressable Weatherproof Sounder Beacon, White Plastic, White Flash |
MKII Addressable Interfaces
Fyreye MKII Addressable Input Module With Isolator
The ZAI-MI is used to monitor and raise alarm from any ancillary equipment such as sprinkler flow switch, aspiration detectors, secondary fire control panel, beam detectors, external power supplies etc.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZAI-MI | Fyreye MKII Addressable Input Module with S/C Isolator (Loop Powered) |
Fyreye MKII Addressable Input/Output Module With Isolator
The ZAIO-MI is both an input and output module in a modern enclosure (2 gang box size) with well protected electronic circuit board to minimise any damages during installation.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZAIO-MI | Fyreye MKII Addressable Input/Output Module with S/C Isolator (Loop Powered) |
Fyreye MKII Addressable Sounder Control Module With Isolator
The ZASC-MI can be used to supply a monitored 24Vdc to operate external relays and as a conventional sounder circuit to run bells or beacon flashers where the current consumption prohibits the use of addressable loop powered devices. The unit also includes input connections to monitor the external power supply status and report the findings to the addressable control panel.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZASC-MI | Fyreye MKII Addressable Sounder Circuit Controller with S/C Isolator (Needs External Power Supply) |
Fyreye MKII Addressable Zone Monitor Module With Isolator
The ZAZM-MI is a conventional zone that can be used for conventional devices and/or for special detectors that are not available in addressable form such as UV detectors, Aspiration detectors etc.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZAZM-MI | Fyreye MKII Addressable Zone Monitoring Unit with S/C Isolator (Loop Powered) |
Zeta Addressable Input/Output Module with Isolator - 230V Switching
This interface can be used to switch 8A at 230V AC. It can only be addressed with it’s DIP switch
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZAIO/230 | Mains switching I/O unit - Fyreye MKII Protocol, 8A @ 230V AC |
Special Mini Modules
Model Number | Description | Datasheets & Manuals |
---|---|---|
SMM/S | Special Mini Modules (Yellow) - Alarm Devices This module allows a conventional sounder or flasher to be connected to an addressable loop (Max current 12mA. 24 per loop). |
|
SMM/B | Special Mini Modules (White) - Beam Detector This module allows the Zeta Beam - auto aligning beam detector to be connected to an addressable loop (Max 16 per loop). |
|
SMM/C | Special Mini Modules (Red) - Call Point This module provides a call point alarm input, that can be connected to a keyswitch to provide restricted alarm activation. It can also be used to connect to 3rd party conventional call points if required. |
MKII Addressable Detector Bases
Bases For Standard MKII Addressable Detectors
The MkII range of detectors can be mounted on 3 different bases, a shallow base (MKII-CB), a deep base (MKII-CB/D) and an isolator base (MKII-IB).
Model Number | Description | Datasheets & Manuals |
---|---|---|
MKII-CB | MKII Shallow Common Base | |
MKII-CB/D | MKII Deep Common Base | |
MKII-IB | MKII Isolator Base |
New Zeta Addressable Base c/w Buzzer
Addressable Base c/w Buzzer for use with MKII-AOP, MKII-AHR, MKII-AHF & MKII-AOH.
Model Number | Description | Datasheets & Manuals |
---|---|---|
ZT-BUZ | Addressable Base c/w Buzzer |
Bases For MKII Addressable Detectors With Built-In Isolators
Fyreye MKII Addressable Common Base for use with MKII-AOPI, MKII-AHRI, MKII-AHFI & MKII-AOHI.
Model Number | Description | Datasheets & Manuals |
---|---|---|
MKII-CBI | Fyreye MKII Addressable Common Base For Use With Detectors c/w Isolator |
Detector Address Label Plate
Also available is a new Detector Address Plate (MKII-CB/DAP) which can be used with the MKII-CB and MKII-CB/D bases. An address label can be fitted to the plate allowing the detector’s address to be easily identified.
Model Number | Description | Datasheets & Manuals |
---|---|---|
MKII-CB/DAP | MKII Addressable Label Plate |
Black Detector Bases
The Fyreye MKII Addressable Detector bases are also available in black. To order add suffix "/B" eg. MKII-CB/B.