Introduction
The Velocity Aspiration Detection uses high power, short wavelength blue LED as the detection light source.
It is very sensitive to small smoke particles generated during the incipient stage of a fire, at which time can still remain invisible to the human eye.
The highest alarm sensitivity of the aspiration detectors is 0.005%/m, which is 1000 times more sensitive than a conventional point type smoke detector.
There is a choice of 2 detectors, covering either small areas (up to 1,000 sqm) or Large areas (up to 2,000 sqm) allowing you the flexibility dependent on your application needs
Features
Single Zone – Small Area Aspirating Detector
- Single pipe detector.
- Four alarm levels.
- 7 relay outputs.
- Up to 1,000m² protection coverage.
- 3-in-1 control, display and programmer front panel.
- RS485 network.
- Supports Modbus RTU open protocol.
