Introduction
The Velocity non-addressable indoor range of NAC devices are available in a variety of solutions to fit many requirements.
The VDOT-S Strobe only device comes with a integrated high intensity white LED strobe with various candela LED output levels, the VDOT-CS strobe version has a choice of either 15cd, 30cd, 75cd 110cd output levels.
The LED strobe considerably lowers the power consumption when the device is in alarm state, allowing more devices to be controlled and powered on the Velocity notification appliance loop / circuits.
The devices are flush wall mounted as standard be flush or surface wall mounted with the addition of a surface mounting back box. They are also available in 2 colour options, red or white. Powered by 2-wire DC24V, these appliances are designed to be connected to, and activated by a UL listed Velocity control panel.
When multiple appliances are connected to the Velocity NAC, the sound and light between products on the same circuit area can be synchronised.
When an strobe signal is emitted, it means there may be an emergency, and should be payed attention immediately.
CURRENT DRAW @ 24vdc:
- 15 Candela 40mA per device
- 30 Candela 60mA per device
- 75 Candela 75mA per device
- 110 Candela 90mA per device
Features
- Designed to meet UL requirements.
- Compatible with all Velocity NAC circuits.
- Adjustable sound and light output levels.
- Designed to be wall mounted.
- For private mode fire alarm use.
- Powered by 2-wire DC 24V.
- Can be installed in a standard 4-inch square double-gang box.
- Chimes and strobes on the same NAC can be synchronised.
Available Models:
VDOT-S/W – Wall Mount Multi-Candela LED Strobe (White)
VDOT-S/R – Wall Mount Multi-Candela LED Strobe (Red)
