SmartConnect Touchscreen 1 Loop Addressable Fire Alarm SystemSimplicity Plus Analogue Addressable Fire Alarm System

Infinity ID2 Intelligent 2-Wire Fire Alarm System

MKII Soft & Hard Addressable Fire Alarm System

As a company who invests heavily in the development of our products we made a decision in 2011 to design a brand new addressable protocol which we have named the Fyreye MKII Protocol.

While the existing protocol has served Zeta Alarm Systems well for many years, it is a dated protocol, which has several limitations. The new Fyreye MKII Protocol has been designed to be flexible, with plenty of room for future expansion. This will allow us to continue developing innovative new products, without being restricted by protocol limitations imposed by the existing protocol.

A weak point of the existing protocol is error checking. We have taken the opportunity to increase the error checking capability eight fold. While this level of error protection could be considered overkill, we believe that the robustness this gives, will allow Fyreye MKII Protocol systems to function error free, even under extreme conditions.

Features Of Fyreye MKII Protocol

  • 250 devices per loop
  • 255 types of devices
  • Up to 3 analogue value readings
  • Read optical detector drift compensation value
  • Manufacturing date can be stored in each addressable device
  • Display battery level/signal strength of wireless devices
  • Improved sounder synchronisation
  • Quick start/stop loop powered sounders
  • Panels can trigger sounder with alert tone, alarm tone or emergency tone
  • Alarm tone selection from control panel (choice of 16 tones - 11 defined, 5 for future use)
  • Panel can read the device’s software version
  • 8 bit checksum for reliable communication
  • All devices can be softly addressed via a hand held programming tool
  • Approximately 50% of protocol commands are free for future expansion and development

MKII Soft & Hard Addressable Systems Brochure Download

MKII Soft & Hard Addressable Systems Brochure Download

Simplicity Plus Analogue Addressable Fire Alarm Panels

Simplicity Plus Analogue Addressable Fire Alarm Panels

The Simplicity Plus panels in metal enclosure has been designed to meet the latest additions to EN54 pt 4 with enhanced functionality including alarm verification, programmable zones, zonal & commown sounder operation and improved I/O unit options.

Model Number Description Loops Devices Download
SP-64/M Simplicity Plus 64 Analogue Addressable Fire Alarm Panel (Metal Enclosure)
CPD Number: 0359-CPD-0145
1 64 Datasheet
Brochure
EN54 Certificate
CertAlarm Certificate
CertAlarm Verification
Intertek Tick Mark Certificate
Installation Manual
User Manual
SP-126/M Simplicity Plus 126 Analogue Addressable Fire Alarm Panel (Metal Enclosure)
CPD Number: 0359-CPD-0145
1 126
SP-252/M Simplicity Plus 252 Analogue Addressable Fire Alarm Panel (Metal Enclosure)
CPD Number: 0359-CPD-0145
2 252
SP-REP Simplicity Plus Full Functional Repeater N/A Installation Manual

Flush Mounted Stainless Steel Simplicity Plus Analogue Addressable Fire Alarm Panels

Flush Mounted Stainless Steel Simplicity Plus Analogue Addressable Fire Alarm Panels

Model Number Description Download
Add /SS to the relevant model number Any of the above Simplicity panels in a Stainless Steel Flush Mount Enclosure  

Simplicity Accessories

Simplicity Accessories

Model Number Description
SP-FMB Flush Mount Bezel for Simplicity Panel, Quatro Repeater, 2A Power Pack

Simplicity Plus 252 with Panel Printer

Simplicity With Printer

Model Number Description Loops Devices Download
SP-252/P Simplicity Plus 252 With Panel Printer 2 252  

Simplicity Plus 252 Command Centre

Simplicity Command Centre

Model Number Description Loops Devices Download
SP-252/CC Simplicity Plus 252 Command Centre
Kindly refer to the Voice Evacuation & Telephone sections to view the range of components available
2 252  

Fyreye MKII Addressable LED Remote Indicators

Fyreye MkII Addressable LED Remote Indicators

A follow on from the ZTA-LE2, with detector alarm visual. Simply address the LED the same as the detector and the remote LED will do the rest. Also, through the handheld MKII programmer, up to 12 seperate addresses can be remotely indicated. The ceiling type modelfits on a MKII base.

Model Number Description Download
MKII-ARL/W MKII Addressable Remote LED Indicator (Wall Mounted) Datasheet
MKII-ARL/C MKII Addressable Remote LED Indicator (Ceiling Mounted) Datasheet

Fyreye MKII Sandwich Sounder/Flasher (LPCB Approved)

Fyreye MkII Sandwich Sounder/Flashers

The most flexible design, allowing sounder and/or sounder/flashers to be added to any MKII addressable detector in order to provide a local alarm. No change in wiring is needed and no need to address the sounder.

Model Number Description Download
MKII-SSB MKII Sandwich Sounder (No Address Required)
CPR Number: 0832-CPR-F0110
Datasheet
EN54 Certificate
CPR Certificate
MKII-SSFB MKII Sandwich Sounder/Flasher (No Address Required) Datasheet

Zeta TCP/IP Communicator

Zeta TCP/IP Communicator

Model Number Description Download
IP-COM Zeta TCP/IP Communicator in Enclosure Datasheet
User Manual
PCB/IP-COM PCB for Zeta TCP/IP Communicator Datasheet
User Manual

Further Information

MKII Addressable Detectors

Standard Detectors

MKII Addressable Smoke Detectors

The Fyreye MKII optical smoke detector (MKII-AOP) uses a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber.

The detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm).

Model Number Description Datasheets & Manuals
MKII-AOP MKII Addressable Optical Smoke Detector

Datasheet

Installation Guide

MKII-AOP/B Black MKII Addressable Optical Smoke Detector
MKII-AOH MKII Addressable Combined Optical Smoke & Heat (A1R) Detector
MKII-AOH/B Black MKII Addressable Combined Optical Smoke & Heat (A1R) Detector

Fyreye MKII Addressable Heat Detectors

The Fyreye MKII Rate of Rise heat detector (MKII-AHR) uses a thermistor arrangement to sense a quick rise in temperature and also a final threshold temperature of 57°C. The Fyreye fixed heat detector (MKII-AHF) has a single thermistor arrangement that gives an alarm at a temperature of 57°C, where the MKII-AHF/ CS90 gives an alarm above 86°C.

Model Number Description Datasheets & Manuals
MKII-AHF MKII Addressable Fixed Heat Only A2S Detector

Datasheet

Installation Guide

MKII-AHF/B Black MKII Addressable Fixed Heat Only A2S Detector
MKII-AHF/CS90 MKII Addressable Fixed Heat Only CS Detector
MKII-AHF/CS90/B Black MKII Addressable Fixed Heat Only CS Detector
MKII-AHR MKII Addressable Rate of Rise & Fixed Heat Detector A1R Detector
MKII-AHR/B Black MKII Addressable Rate of Rise & Fixed Heat Detector A1R Detector

Detectors With Built In Isolators

MKII Addressable Smoke Detectors with Built In Isolators

The Fyreye MKII optical smoke detector with built in isolator (MKII-AOPI) uses a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber.

The detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm).

Model Number Description Datasheets & Manuals
MKII-AOPI MKII Addressable Optical Smoke Detector With Built-In Isolator

Datasheet

MKII-AOPI/B Black MKII Addressable Optical Smoke Detector With Built-In Isolator
MKII-AOHI MKII Addressable Combined Optical Smoke & Heat (A1R) Detector With Built-In Isolator
MKII-AOHI/B Black MKII Addressable Combined Optical Smoke & Heat (A1R) Detector With Built-In Isolator

Fyreye MKII Addressable Heat Detectors with Built In Isolators

The Fyreye MKII Rate of Rise heat detector with built in isolator (MKII-AHRI) uses a thermistor arrangement to sense a quick rise in temperature and also a final threshold temperature of 57°C.

The Fyreye fixed heat detector with built in isolator (MKII- AHFI) has a single thermistor arrangement that gives an alarm at a temperature of 57°C, where the MKII-AHFI/ CS90 gives an alarm above 86°C.

Model Number Description Datasheets & Manuals
MKII-AHFI MKII Addressable Fixed Heat Only A2S Detector With Built-In Isolator

Datasheet

MKII-AHFI/B Black MKII Addressable Fixed Heat Only A2S Detector With Built-In Isolator
MKII-AHFI/ CS90 MKII Addressable Fixed Heat Only CS Detector With Built-In Isolator
MKII-AHFI/ CS90/B Black MKII Addressable Fixed Heat Only CS Detector With Built-In Isolator
MKII-AHRI MKII Addressable Rate of Rise & Fixed Heat Detector A1R Detector With Built-In Isolator
MKII-AHRI/B Black MKII Addressable Rate of Rise & Fixed Heat Detector A1R Detector With Built-In Isolator

Addressable Remote LED Indicators

There are two models for the remote LED indicator, a wall type MKII-ARL/W and ceiling mounted type (requires a base) MKII-ARL/C.

Each unit is equipped with 8 LEDs and mimics the detector LED in alarm condition.

Model Number Description Datasheets & Manuals
MKII-ARL/C Ceiling Mounted Addressable Remote LED Indicator

Datasheet

MKII-ARL/W Wall Mounted Addressable Remote LED Indicator

Assessed to ISO 9001:2015 - Certificate Number 330 DBI BSI Intertek VdS